Universal PID and ON/OFF controller MS8106

  • P, PI, PID, 2- and 3 state control modes 
  • Function Autotuning
  • Shockless switching between automatic and manual mode
  • Non-volatile memory
  • Communication (option) - RS485, MODBUS RTU Protocol


    The PID controller MS8106 of MICROSYST is designed for measuring and control of different process parameters. It can realize P, PI or PID control (program selectable), and there is a possibility for limitation of the integral component. There are also 2- and 3-state control modes. The outputs are controlled by pulse width modulation (PWM), there is a possibility for setting of different times for forming of “positive” (K1) and “negative” (K2) output.
    All data are s
    tored in non-volatile memory, including the current state of the controller, i.e. after restoring of the power supply, it enters the same control mode, in which it has been before its fault (the integral component is reset in this case, so till its second accumulation there will be an interference in the controlled parameter for PI or PID controller).
    There is a shockless switching between automatic and manual mode, direct supervision of the process variable (Pv), the set-point (SP) and the output (Out). By the function Autotuning you can easy tune the PID parameters.


    Download current descriptions below or click here for older descriptions:

    PDF - MS8106 English manual (0,58 MB)
    MS8106-manual-BG (0,89 MB)

    Ask a question about this product





    Last Updated: Wednesday, 17 October 2018 08:40
    You are here PRODUCTS By Type Controllers Universal controllers